The minimum thickness of the brake pads also determined based on a number of factors, including the brake system for itself (designed itinerary or cylinder piston brake calipers, the regulator gap, brake pedal clearance, etc.), the type of brake pads (asbestos type, semi-metallic, NA0 type); brakes and brake shoe assembly circumstances. For example: riveting junction connections usually high temperature treatment, when the brake pad wear rivet to rivet head exposed, the rivet will directly damage the brake disc or brake drum. The opposite is the aramid fiber brakes manufacturers, bond-type brake pads may be worn to the metal layer exposed, only to reach this point the brake pads, which have led to friction between metals and harsh noise. In everyday life brake pads manufacturers, people tend to occur until the brakes only to repair the above, it is safe both for the driver of the vehicle itself is extremely unfavorable. So when it would need to replace the brake pads do? Usually when the following situations, we believe it is necessary to replace the brake pads: the thickness of the brake pads is less than 1. Allow the vehicle owner's manual to replace the minimum standards; 2. brake pad wear indicator sheet exposure to the brakes alert (including a computer alarm or harsh sound of metal friction); more than two points, if not continue to use, usually run a few thousand kilometers are no big problem, but if it is a long time not to replace, then not only may be due to direct contact with brakes The scrap metal liner, but also easily lead to brake failure. Brakes brakes manufacturers _ _ Chi Auto Parts Co., Ltd. provided by Linyi Chi auto parts. Linyi Chi Auto Parts Co., Ltd. (www.zxqcpj. China) (www.zxqcpj. China) strong, credible, Shandong Linyi brake shoes, tablets and other industries has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Chi auto parts and you hand into the brilliant, for a better future!